Geometrically nonlinear free vibration of shear deformable piezoelectric carbon nanotube/fiber/polymer multiscale laminated composite plates

The nonlinear free vibration of carbon nanotubes/fiber/polymer composite (CNTFPC) multi-scale plates with surface-bonded piezoelectric actuators is studied in this paper. The governing equations of the piezoelectric nanotubes/fiber/polymer multiscale laminated composite plates are derived based on first-order shear deformation plate theory (FSDT) and von Kármán geometrical nonlinearity. Halpin–Tsai equations and fiber micromechanics are used in hierarchy to predict the bulk material properties of the multiscale composite. The carbon nanotubes are assumed to be uniformly distributed and randomly oriented through the epoxy resin matrix. A perturbation scheme of multiple time scales is employed to determine the nonlinear vibration response and the nonlinear natural frequencies of the plates with immovable simply supported boundary conditions. The effects of the applied constant voltage, plate geometry, volume fraction of fibers and weight percentage of single-walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes (MWCNTs) on the linear and nonlinear natural frequencies of the piezoelectric nanotubes/fiber/polymer multiscale composite plate are investigated through a detailed parametric study.     

Vortex induced vibration and vortex shedding characteristics of two side-by-side circular cylinders of different diameters in close proximity in steady flow

This paper presents results of a numerical study of vortex-induced vibrations of two side-by-side circular cylinders of different diameters in steady incompressible flow. The two-dimensional Reynolds-averaged Navier–Stokes equations with a SST k–ω turbulence model are solved using the Petrov–Galerkin finite element method and the Arbitrary-Lagrangian–Eulerian scheme. The diameter ratio of the two cylinders is fixed at 0.1 and the mass ratio of both cylinders is 5.0. Both cylinders are constrained to oscillate in the transverse direction only. The Reynolds number based on the large cylinder diameter and free stream velocity is fixed at 5000. The effects of the reduced velocities of the cylinders on the vibration amplitude and vortex shedding regimes are investigated. It is found that for the range of parameters considered, collision between the two cylinders is dependent on the difference of the reduced velocities of the cylinders. Presence of the small cylinder in the proximity of the large one appears to have significant effects on the vortex shedding regime and vibration amplitude of the large cylinder.     

Elastic responses of a flotation ring in water waves

The gravity-type fish cage is extensively applied in open-sea fishery aquaculture. Its practicality is closely related to the reliability of the flotation ring which is its main load-bearing component. Therefore, it is necessary to study the elastic responses of the flotation ring in ocean waves. Here, an analytical method is proposed to analyze the elastic deformations of a circular ring subjected to water waves. The governing equations of six degree-of-freedom motions and elastic deformations are obtained according to Euler's laws and curved beam theory. In order to examine the method, a series of physical model tests were carried out. The surge and heave displacements of the ring between the predicted results and experimental measurements are compared, and good correlation is represented. The effects of the propagation directions of the incident wave on elastic responses of the ring are then analyzed. It is concluded that small deformations of the ring occur when the configuration of the mooring cables is symmetrically arranged along the propagation direction of the incident waves. Additionally, the out-of-plane stiffness is suggested to be strengthened in order to diminish the corresponding deformations.     

Flow around four cylinders arranged in a square configuration

This paper presents an experimental study of the flow around four circular cylinders arranged in a square configuration. The Reynolds number was fixed at Re=8000, the pitch-to-diameter ratio between adjacent cylinders was varied from P/D=2 to 5 and the incidence angle was changed from α=0° (in-line square configuration) to 45° (diamond configuration) at an interval of 7.5°. The flow field was measured using digital Particle Image Velocimetry (PIV) to examine the vortex shedding characteristics of the cylinders, together with direct measurement of fluid dynamic forces (lift and drag) on each cylinder using a piezoelectric load cell. Depending on the pitch ratio, the flow could be broadly classified as shielding regime (P/D≤2), shear layer reattachment regime (2.5≤P/D≤3.5) and vortex impinging regime (P/D≥4). However, this classification is valid only in the case that the cylinder array is arranged nearly in-line with the free stream (α≈0°), because the flow is also sensitive to α. As α increases from 0° to 45°, each cylinder experiences a transition of vortex shedding pattern from a one-frequency mode to a two-frequency mode. The flow interference among the cylinders is complicated, which could be non-synchronous, quasi-periodic or synchronized with a definite phase relationship with other cylinders depending on the combined value of α and P/D. The change in vortex pattern is also reflected by some integral parameters of the flow such as force coefficients, power spectra and Strouhal numbers.     

Vortex-induced vibration of two elastically coupled cylinders in side-by-side arrangement

Vortex-induced vibration (VIV) of two elastically coupled circular cylinders in side-by-side arrangement is investigated numerically. The Reynolds-averaged Navier–Stokes equations are solved by the finite element method for simulating the flow and the equation of motion is solved for calculating the vibration. The mass ratio (the ratio of the mass of the cylinder to the displaced fluid mass) is 2 and the Reynolds number is 5000 in the simulations. Simulations are carried out for one symmetric configuration (referred to be Case A) and one asymmetric configuration (referred to be Case B). In both Case A and Case B, the primary response frequencies of the two cylinders are found to be the same both inside and outside the lock-in regimes. Five response regimes are found in both cases and they are the first-mode lock-in regime, the second-mode lock-in regime, the sum-frequency lock-in regime and two transition regimes. When the vibration is transiting from the first- to the second-mode lock-in regimes, the vibration of each cylinder contains both first- and the second-mode natural frequencies, and the vibrations are usually irregular. In the transition regime between the second-mode lock-in and the sum-frequency lock-in regimes, the response frequencies of both cylinders increases with an increase in the reduced velocity until they are close to the sum of the two natural frequencies. In both cases, the lower boundary reduced velocity of the total lock-in regime (the sum of the five lock-in regimes) is about 3 and the upper boundary reduced velocity is about 11 times the first-to-second-mode natural frequency ratio.     

Frequency effects on lift and drag for flow past an oscillating cylinder

A transversely oscillating cylinder in a uniform flow is modeled to investigate frequency effects of flow-induced wake on lift and drag of the cylinder. Specifically, verified unsteady fluid dynamic simulations using an immersed-boundary method in a fixed Cartesian grid predict the flow structure around the cylinder and reveal how the integration of surface pressure and shear distributions provides lift and drag on the oscillating cylinder. In this study, frequency ranges to be considered are both near and away from the natural frequency of wake vortex shedding. Subsequently, the effects of frequency lock-in, superposition and demultiplication on lift and drag are discussed based on the spectral analysis of time histories of lift and drag.